Grid-tie Mounts & Wires

Copper-tin plated aluminum lug with stainless steel hardware. Mounts to SWH Standard Rails and SWH Lite Rails with self-grounding, 1/4″ x 20mm SS t-bolt.

SWH Standoff is constructed from 1″ OD solid aluminum alloy and mounts to rafter with a 5/16″ SS threaded hanger bolt. Additional hardware include SS 3/8″ x 1″ hex bolt and 3/8″ flat washer to mount L-feet and other types of brackets to standoff....

SWH 4" Self-Grounding Splice Plate joins and bonds SWH Standard Rails or SWH Ecolite Rails together. SWH 6" F- Splice bar joins and bonds two SWH Standard Rail or SWH Ecolite Rail sections together. SWH 8" Splice bar joins and bonds two SWH Standard...

APsystems 3rd generation of dual microinverters are reaching unprecedented power outputs of 640VA or 768VA or 880VA to adapt to today’s larger power module. With 2 independent MPPT, encrypted ZigBee signals, the DS3-S, DS3-L and DS3 benefit from an entirely new architecture and are...

SQUARE D AC DISCONNECT - D222NRB Square D, AC Disconnect, NEMA 3R, 60A, 240V, 2-Pole Fused, Neutral Bar, Hub, 49705, D222NRB Use these General-Duty Square-D AC safety switches for single-phase or three-phase grid-tie inverter outputs if you are back-feeding a circuit breaker to make the...

Square D, AC Disconnect, NEMA 3R, 30A, 240VAC, 2-Pole Unfused, Hub, 59123, DU221RB Square D offers breakers, switches, load centers, grounding kits and more.  Use these General-Duty Square-D AC safety switches for single-phase or three-phase grid-tie inverter outputs if you are back-feeding a circuit...

SQUARE D AC DISCONNECT - D221NRB Square D, AC Disconnect, NEMA 3R, 30A, 240V, 2-Pole Fused, Neutral Bar, 49590, D221NRB Square D offers breakers, switches, load centers, grounding kits and more. Features Highlights - 30 Amp. 240VAC. 2-Pole Fused. Neutral Bar. NEMA 3R.   General Information...

SWH SS wire management clips holds 3 wires, including a trunk cable, to the rail. 100 pieces per pack.

UV-resistant rubber end cap for SWH Standard Rails and SWH Ecolite Rail.

SWH Dual Anchor Flat Post Base and SWH Dual Anchor Flange Post Base for standoff provides extra stability and attachment strength. Comes with 2-5/16″ x 3.5″ Lag screws,5/16×2″ center bolt, 3/8×1″ Hex Bolt,and washer. (DOES NOT COME WITH POST)

Self grounding end clamps for different module heights. Set includes 1/4” x 2” SS304 t-bolt and 1/4” SS316 flange nut. Different SS grades are supplied to minimize galling effects.

End clamps for different module heights. Set includes 1/4” x 2” SS304 t-bolt and 1/4” SS316 flange nut. Different SS grades are supplied to minimize galling effects.

Self grounding end clamps for different module heights. Set includes 1/4” x 50mm/60mm/70mm SS304 t-bolt and 1/4” SS316 flange nut. Different SS grades are supplied to minimize galling effects.

Top mounting mid clamp holds modules to rail with stainless steel 1/4" t-bolt and flange nut.

6 AWG braided tin plated copper bonding jumper. 10 5/8″ overall length. Bonding jumper assembly into top mounting slot of rail. Torque flange nut in place to 8 ft-lbs. Grounding washer nibs and grounding t-bolt will penetrate rail anodization and create grounding path to...